Spatial expression, design design, and facade design of buildings.
Designing metal is used to match the image of architecture and stores.
design metal to match the image of the architecture or store.
With the recent outbreak of the new coronavirus (covid-19)
I believe that the way of space is also changing.
The good thing about Designing Stainless Steel and Designing Titanium is
They are highly durable.
They can be used for anti-virus measures such as sterilizing alcohol.
They can be cleaned and sanitized many times, and always maintain a clean, safe and secure surface.
This is one of the main features of Designing Stainless Steel and Designing Titanium.
Stainless steel and titanium, which are also used in medical instruments and equipment, are one of the
We are striving to enhance the significance of their existence in the age of corona.
We will continue to make efforts to enhance the significance of their existence.
Cleaning walls with alcohol sterilization Cleaning table tops
Now, let’s take a look at the beautiful designs of design stainless steel and design titanium.
Designing Stainless Steel and Designing Titanium
I would like to introduce how to make the beautiful design of Designing Stainless Steel and Designing Titanium last for a long time.
The interior and exterior are beautiful right after installation.
However, with the passage of time, fingerprint stains, rust, and other phenomena will appear.
We want to put off that inconvenient time as long as possible.
We want to sustain beautiful surfaces through regular maintenance.
This is also the wish of our design metal manufacturers.
There are many ways to keep the surface of design metal beautiful.
There are many ways to keep the surface of design metal beautiful, but this time we will introduce a relatively simple method that can be done without special skills.
There are many ways to keep the surface of design metal beautiful.
The problem indoors is hand stains and dirt.
This can be wiped off immediately, but
This can be wiped off immediately, but there are cases where it is difficult to wipe it off, which is often a problem.
It is especially difficult when fingerprints and other stains cannot be removed after construction and before delivery.
This is a particularly common problem.
This is a case that we receive many inquiries about.
Next is the outdoor design panels.
This is another case where we thought that general-purpose stainless steel would be fine.
This is another case where we thought general-purpose stainless steel would be fine, but the environment was unexpectedly bad and it rusted.
This is an unexpected situation.
This is another case that we often receive inquiries about.
A simple and quick solution to these problems is
MaCoat GC is a silicon-based coating material.
(*This is handled by our coating division subsidiary Top MaCoat Ltd., )
MaCoat GC can be applied to stainless steel and titanium surfaces without any special knowledge.
The MaCoat GC can be applied to the surface of stainless steel or titanium without any special knowledge.
We will explain how effective it is in a demonstration test.
Our company is located right next to the Dazaifu Interchange on the Kyushu Expressway.
There is a large amount of Nox Sox, yellow sand, and PM2.5 flying in.
It is a very suitable place for outdoor exposure. (Although salt damage is impossible).
Because of this environment, we have been exposing various developed products to the outdoors.
google map
Here is what you can see as the corrosion resistance evaluation of MaCoat GC.
As you can see, where the first rust occurs with general-purpose stainless steel
After coating with MaCoat GC, the first rust is not seen.
(after 2 years of outdoor exposure). (After 2 years of outdoor exposure)
The upper part is the general-purpose stainless steel as it is.
The lower slightly darker part is the Macoat_GC coated part.
You can see the rust on the top side where Macoat_GC is not applied.
You can see the rust on the upper side without Macoat_GC.
The lower part, which is coated with Macoat_GC, is rust-free.
Similarly, the left side is the uncoated part of Macoat_GC.
There is rust on the surface.
The right side is the part coated with Macoat_GC.
There is no rust.
The fingerprint resistance of Macoat_GC has already been used by many people since its release.
Many people have already used Macoat_GC for its fingerprint resistance since its release and have felt the effects.
Outdoor installation and on-site installation can be handled with simple operations.
It is possible to apply the coating afterwards even in places that rust or get dirty unexpectedly.
Even in places that rust unexpectedly or get dirty, we can provide a post-coating solution.
(*Please consult us for cleaning and polishing before coating.)
⇒Column “Rust Removal and Fingerprint Resistance Coating for Outdoor Lettering Signs
The installation method is very simple.
⇒＜Introduction of construction method＞
In this way, design titanium and design stainless steel are not only beautiful but also durable.
They are not only beautiful, but also very durable.
In addition, by adding a coating, it is possible to keep the surface beautiful for a long time.
The surface can be kept beautiful for a long time.
Outdoor use example: Pillar section, Kitakyushu Branch, MI Bandai Stainless Co.
Example of entrance door use: Ryouyu Corporation, entrance door of head office building
Example of kitchen use: Kashwagi Sui Associates, First-Class Architect Office
Example of use: Atelier Sankaku Scale Co.
Example of use of exterior signage: (by Koichi Furumori Architects & Designers, Inc.
To meet the changing times and environment
I hope that you will be able to feel the possibilities of designing titanium and
We hope that you will be able to feel the possibilities of designing titanium and designing stainless steel, which can be changed in function and design to suit the changing times and environments.
We look forward to working with you.